How to run SAS4WinCE without imaging.dll
If your PNA is missing imaging.dll
Check for it in \windows directory at your PNA filesystem, Note that explorer may NOT show system files by default, Go to Menu - View->Folder Options and uncheck all checkboxes to make hidden files visible. If you do not have imaging.dll in \windows directory of PNA then unpack this archive to the same directory where you installed SAS4WinCE. This archive contains required dlls and Run_SAS4WinCE.exe script which will register ImagingFactory component and then will launch SAS4WinCE application. So, just run launcher script instead of running application directly. ImagingFactory launcher script [[Ссылки могут видеть только зарегистрированные пользователи. ]]> ImagingFactory launcher script [[Ссылки могут видеть только зарегистрированные пользователи. ]]> |
How to prepare cache for SAS4WinCE with SASPlanet
SAS4WinCE can work with unpacked cache with the same file structure as SASPlanet
create by default. Cache copied to storage card from SASPlanet cache directory is OK... but it might be to big to fit on storage card in PNA. To avoid this problem you can use export feature of SASPlanet, to export only area of interest from required sources in a certain set of zooms. But ofcourse, you need to download this areas in this zooms from this sources first, to have data in cache to export Let's start our guide through cache preparing from selecting main map layer in SASPlanet on PC
Next step is not required but very useful. SASPlanet can show the existense of tiles in it's cache for selected source and zoom. Just select source and zoom you want to download and you will see on map what tiles are in cache
Now we can select areaof interest to download map tiles
After defining area to download tiles you will have the following popup dialog
After current download will be complete, you can use previous selection option to download next zoom of the same area. You would need to repeat this downloads for each source and each zoom you need. It might be usefull to change settings for fill showing (as we did in step 2) for each new source and zoom you download, so you may see what tiles of map are actually downloaded, and what are not. When all neccessary sources and zooms will be in cache you are ready to start with export. Use the same previous selection option to wake up dialog, but click on Export tab in it.
Last step is to copy files from export directory under CACHE subdirectory on PNA. |
Hi everybody.
Hi everybody.
I am Alexei from Bulgaria. I am sorry for the language but I only can write in english and bulgarian:o. I find SASWiin CE is very interesting program. At first I try sasplanetj from here [[Ссылки могут видеть только зарегистрированные пользователи. ]]> So here is what I mean: 1. I download the files 2. Extract them and start it on WM 5.0 3. It starts OK 4. The GPS is also OK - it gives me my coordinates 5. and here appears the problem - it is trying to show me an image that does not exsist in the cache - for example the screen shows me white screen with writing "sat\z13\2\x2338\1\y\1751.jpg" while in cache I have sat\z13\2\x2327,2328,2329,2330 and 2331 but not 2338--- or if I have this folder for other zoom than I don't have the next one of the path to jpeg. I try to make the cache folder many times using sasplanet (pc version) - moving map in small area of my place, changing zoom changing maps source and ...everything - but it wan't create the folders or jpegs that SASWiin CE is trying to load on screen. So please give me some help guys:pivo: Many thanks. Alex |
Цитата:
Big SAS requires to perform download for each zoom of each source separatly SAS for PC have function in menu to show what tiles are actually in cache. So you can check what you actually have in each zoom in each source As it shown here [[Ссылки могут видеть только зарегистрированные пользователи. ]]> After you select zoom, SAS will highlight areas which have tiles at selected zoom. Thus you can check what you realy have and what you do not have. Next .. the simplest way is just copy the whole cache from sas on pc to flash card. (or limit this to subdirs which match map sources you need) Export operation as it described [[Ссылки могут видеть только зарегистрированные пользователи. ]]> zoom and each source you need. Unlike SAS on PC which do resize of tiles from other zooms when tile is missed in current zoom, SAS4WinCE do not do resize and just show you empty square with tile path in it. So if you have any doubts you can check missing file actually presents on your flash card. (or in source cache ja big cac wherefrom you copied files) When you will have success with unpacked cache ... then you can try packed one as described [[Ссылки могут видеть только зарегистрированные пользователи. ]]> Цитата:
with sas4wince... or in other words you do not have tiles in cache for region you are trying to browse with sas4wince |
Цитата:
I resolve the problem. It works and it's a great toy for a big boy... Realy great app. After downloading the four exes I put them on the sd and start everyone of them. Maybe that was the mistake. I fix the com port in config file - it is com4 on my pda. After that I start one of the exes and it shows my my coordinates but the program is trying to lo load jpeg wich I don't have in the cache folder. I follow the path of the jpeg using sas for pc and guess what - i am in Africa. I think it was a kind of bug. After that i delete the SAS4WinCE folder from sd, download it again and copy only sas4wm exe and the other staff from zip. Other 3 exes I o not copy to the sd. Start the program and everything is OK. So I would like to say a big THANK YOU for the great app. |
Цитата:
(when it's invalid coordinates are in red color) But till it is invalid application do not lock it's position on map to this ccordinates. It uses last known VALID position. In your case there was no last known valid position, so last known valid position was 0,0 This is somewhere in Atlantic near Africa coastline... When GPS fix become valid (coords in status line in black color) application lock map position to it coordinates. On the next start application use saved last known position (from laststate.cfg file) So it starts to show map at position where you turned off application. Guess you wasn't patient enough to wait untill gps will fix a valid position. This can take a lot of time (or even do not happen at all) if you play with GPS inside building. |
Цитата:
patient enough ?? play with GPS inside building ---:):):) you should ask my neighbours or my wife they all think I have a kind of problems in my head, to stay out in the cold looking at my phone:shock::shock: |
Цитата:
But GPS receiver in addition to coords gives flag denoting is fix valid it or not. (the state of this flag shown with color of status line on the bottom of screen red = invalid, black = valid) GPS can give coords pointing to your location but mark it as invalid due to small number of sattelits or due to low signal/noise ration from satellites it used in fix. While it is marked as invalid then application do not lock to it. After GPS fix becomes valid you can press "center to gps" buttone (one with 4 arrows) to center screen on you location |
Вложений: 2
Hi
Thank you for moving posts here. I realy don't want to make a mess in your forum. So please excuse me (you and other guys). I want to ask you for some help again:o The problem is with that zeroes (the photos) - I cant understand what are they for? The one in the green rectangle from second picture is odometer(as shown on the headpost but the others??? They dont disapear with the butonns(first picture). The problem is that some buttons are under them and I cant see it. I try to remove them by correcting config file like this -- #odometer=-118,-53,true (remove)---- #odometer=-118,-53,false (remove) but they still stay on the screen. |
Цитата:
flexible and complicated.. Thre are 2 independent terratrips in this config. One is on top right and other is on bottom right. Terratrip itself is not something visual on screen. Each terratrip is a set of counters which counts time(T) and distance(L) Each terratrip have 3 states stopped, count forward and count back depending on button you pressed... The set of counters includes T and L counters for each state. And even more... there are 2 copies of each of this counters. One for current part of way and one is cumulative for all your trip. The only difference between this 2 sets is that 'current' you can clear with clear button and 'cumulative' continue counting untill you wake up special dialog to clean it's values So ONE terratrip have inside the following counters currentLfwd currentTfwd currentLback currentTback currentLstop currentTstop cumulativeLfwd cumulativeTfwd cumulativeLback cumulativeTback cumulativeLstop cumulativeTstop This is primary values from which some other can be calculated currentLway = currentLfwd - currentLback (distance passed on your way) currentLmove = currentLfwd + currentLback (distance in move) currentLtotal = currentLfwd + currentLback +currentLstop (total distance including one when terratrip was stopped) currentTway = currentTfwd - currentTback (time on your way) currentTmove = currentTfwd + currentTback (time on move) currentTtotal = currentTfwd + currentTback +currentTstop (total time including time when terrtrip was stopped) And the same set for cumulative counters cumulativeLway cumulativeLmove cumulativeLtotal cumulativeTway cumulativeTmove cumulativeTtotal Here is formulas for speed calculations currentVfwd = currentLfwd/currentTfwd (average forward speed) currentVback= currentLback/currentTback (average backward speed) currentVstop= currentLstop/currentTstop (average speed when terratrip was stopped) currentVway= currentLway/currentTmove (average speed on way) currentVmove= currenLmove/currentTmove (average speed in move) currentVtotal=currentLtotal/currentTtotal (average speed including stopped time) currentVmax - (maximum speed by GPS) currentV - (current speed by GPS) And again the same set of cumulative values cumulativeVfwd cumulativeVback cumulativeVstop cumulativeVway cumulativeVmove cumulativeVtotal cumulativeVmax cumulativeV - (the same as currentV ) Well ... what you see on screen is a set of terratrip buttons and displays. Buttons are images and displays are texts only... At the end of .cfg file you will find 2 [terratrip] sections with buttons positioning and displays positioning... and also some extra parameters.. Config of terratrip is quite flexible and allows to build as a simpliest odometer as a very complicated device sutable for rally pilots ;) Here is a [[Ссылки могут видеть только зарегистрированные пользователи. ]]> Oh yeah... If you do not need it .... just comment out the whole section of terratrip with it parameters #[terratrip] #name=mini #imagesSubdir=ttmini #autohide=false ##--terratrip buttons #ttclear=-158,2,true,clear,tools ##--terratrip displays -- #currentLfwd=bigFont,-96,2,true #currentTway=bigFont,-155,2,true,short #currentVway=smallFont,-155,21,true #currentVmax=smallFont,-116,21,true #currentV=smallFont,-77,21,true # - at the begining of line means comment Most of things you do not need may be commented out. |
Вложений: 1
Thank you again.:)
The problem is fixed. One last(I hope) question: When I try to open sattelite picture together with google map like this in the attachment, it only shows me map or sattelite separаtеly.:mad: In the cache I have 2 folders - both & sat. The sat fold. is g.sat and in the both are g.maps - Is this so? Or I should make another cache? Or the problem is not in the cache? |
Цитата:
SAT = Google sat images MAP = Google maps BOTH = Google hibrid map layer to place over sat images So you need SAT and BOTH in cache to overlay hybrid layer over sattelite images SAT and MAP are main layers... BOTH is overlay hibrid layer In SAS4WinCE there are 2 buttons. One is to select main map layer.. and other is to select overlay hybrid layer. So with map selection button you select Google sat as main layer. And with layer selection button you select Google hybrid layer to overlay over main map layer |
Текущее время: 18:19. Часовой пояс GMT +3. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd. Перевод: zCarot